Motor Velocity 3.5 R brushless
Produktinformation Motor Velocity 3.5 R brushless Velociti är Novaks senaste serie av sensorbaserade bortslösa racing elmotorer för RC bil. De är utrustade med nickelpläteradesintrade neodym magneter för optimal prestanda. Varje enskild motor är handbyggd i Kalifornien. Avsedda för kompromisslös racing Velociti 3.5R This is ideal for customers wanting Novak's fastest brushless motor and for top-level competition touring car applications (#3403/#3000) Velociti 4.5R Ideal for competition touring cars (#3404/#3001) Velociti 5.5R Ideal for competition touring cars and high-traction off-road applications(#3405/#3002) Velociti 6.5R Ideal for Off-Road and low-traction applications and faster than the Velociti 7.5(#3406/#3003) Velociti 7.5R Ideal for Off-Road and low-traction applications(#3407/#3007) All Velociti motors are compatible with all Novak brushless ESCs, including: GTB Spread Spectrum ESC (#1711) GTB 4-Cell Programmable Brushless/Brush ESC (#1714) GTB 4-Cell Spread Spectrum Brushless/Brush ESC (#1715) [Please note, the Velociti-series brushless motors are not for use with Novak’s Super Sport ESC. The Super Sport and Super Sport Plus ESCs are rated for use down to 8.5 turns brushless.] VELOCITI BRUSHLESS MOTOR FEATURES Sensor-based for excellent braking and low-speed driveability High-performance Nickel-plated Sintered Neodymium rotor1 (ROAR-Approved!) for maximum motor acceleration, braking power, and performance in high-temperature conditions Oversized front bearing for increased load handling and bearing life Lightweight ribbed aluminum end bells2 Provides approximately 20% longer run-times compared to brushed motors Specifically designed for R/C vehicles Direct-Solder Wiring Tabs for flexible soldering options Minimal maintenance User-replaceable rotor, front end bell/bearing, and rear bearing (click to link to brushless motor accessory page) Thermal Overload Protection (when used with a Novak brushless ESC) No cogging Factory hand-wound and race-tuned Meets all ROAR specifications VELOCITI BRUSHLESS MOTOR SPECIFICATIONS (click to link to motor spec chart) Turns: 3.5 (#3403); 4.5 (#3404); 5.5 (#3405); 6.5 (#3406); 7.5 (#3407 System) Design: Sensor-based Motor Size: 2.08” L X 1.41” D (52.8 x 35.8 mm) Input Voltage: 4-6 cells (1.2 V/cell or 4.8 – 7.2 total volts) Magnet: Nickel-plated, Sintered, high-strength Neodymium1 Watts: 620 (#3403), 530 (#3404), 420 (#3405), 390 (#3406), 340 (#3407) KV (unloaded): 10,500 (#3403); 9,000 (#3404); 7,400 (#3405); 6,400 (#3406); 5,800 (#3407) RPM/Volt Motor Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm) Motor Weight: 6.61 oz. (187 grams) Shaft Diameter: 0.125” (3.2 mm) [accepts all existing pinion gears] Bearing Size: 1/2” x 3/16” (12.7x4.8mm) Timing Ring: Black Protection: Thermal
Pris: 1395.00Kr