Fartreglage HV Pro

Produktinformation
Fartreglage HV Pro

HV PRO HIGH-VOLTAGE BRUSHLESS ESC FEATURES

Three fully programmable throttle profiles (2 with reverse)
User-friendly interface and 4 different color status LEDs. User can fine-tune one parameter at a time without having to re-enter other parameters
Nine adjustable parameters: Minimum Brake (10 settings from 0-30%), Drag Brake (10 settings from 0-30%), Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 1-12%), Throttle Curve (Linear & Expo), Brake Frequency (7 settings from 1-8 kHz), Brake Disable, Motor Rotation and Li-Po Cut-Off
Easily bolts into the Traxxas® E-Maxx™, Traxxas® E-Revo™ and HPI® E-Savage™ trucks and also fits Kyosho® Twin-Force™.
Compatible with Novak HV Brushless Motors: HV-Series with 5mm Shaft (#3524-3527), HV-Series with 1/8" Shafts (#3424 & #3426) and original HV4400.
Dual-Battery Inputs -- No external receiver pack required when used with dual battery packs
Locked Rotor Detection Circuitry
Gold-Plated PCB Direct-Solder Wiring Tabs
User-Replaceable Input Harness (#5315)
User-replaceable Power Trans-Cap Module (#5684) for cooler operating temperatures
Includes Power-Boost ESC Cooling Black Fan kit (#5645)
Includes black ESC heat sink
100 percent Digital Microprocessor-Controlled
Built-in Smart-Stop Li-Po Cut-Off Circuitry* to monitor battery voltage level that automatically detects 2S, 3S or 4S Li-Po batteries
Novak’s Smart Braking II
Thermal Overload Protection
High-power BEC for strong and fast servo response
Radio-Priority Circuitry for ultimate control
Polar-Drive Circuitry
Digital Anti-Glitch Circuitry
One-Touch Set-Up for quick, easy transmitter setup
Designed and assembled by Novak in Irvine, Calif., using globally-sourced components

HV PRO HIGH-VOLTAGE BRUSHLESS ESC SPECS

Input Voltage: 6-14 cells (1.2 volts/cell) or 2S-4S Li-Po cells
Footprint: 1.75” x 2.17” x 0.85”; (44.5 x 55.1 x 21.6 mm)
Weight (without wires): 4.76 oz. (135 g)
Throttle Programs: 3 (2 with reverse, 1 without)
Heavy-duty BEC 6 Volts/3 Amps
Rated Current: 400 Amps/phase @ 25°C MOSFET Temp.
On-Resistance: 0.0013 ohms per phase
Braking Current: 400 Amps/phase @ 25°C MOSFET Temp.
Power Motor/Battery Wire: 14-Gauge Super-Flex Copper-Strand Silicone
Motor Limit: any Novak sensor-based 550-size Brushless
Li-Po Cut-Off Voltage: 6.25V (2S), 9.375V (3S), 12.5V (4S)

Pris: 2495.00Kr

• Meddela en Vän