Motor Velocity 6.5L brushless

Produktinformation
Motor Velocity 6.5L brushless

Velociti L är Novaks senaste serie av sensorbaserade bortslösa racing elmotorer för RC bil. Velociti L har lugnare acceleration och mjukare broms än Velociti R-motorerna men samma topphastighet. De är utrustade med nickelpläterade sintrade neodymium magneter i rotorn för optimal prestanda. Varje enskild motor är handbyggd i Kalifornien.

Provides excellent control in slippery off-road and tight on-road courses
Lighter weight than Velociti Series motor
Sensor-based for excellent braking and low-speed driveability
Compatible with Novak 13MM Sintered Tuning Rotor (#5909) for further tuning options
High-performance, Nickel-plated Sintered Neodymium rotor (ROAR-Approved)
Oversized front bearing for increased load handling and bearing life

VELOCITI LIGHT BRUSHLESS MOTOR RECOMMENDATIONS

Velociti Light 3.5L Racing Brushless Motor is 3.5 turns, and is ideal for top-level touring car racing on tight race tracks. Also ideal for Carpet Racing or open track 1/12th scale racing. (#3303)
Velociti Light 4.5L Racing Brushless Motor is 4.5 turns, and is ideal for competition level 4WD racing, 1/12th scale racing, or 5-cell 4WD off-road applications. (#3304)
Velociti Light 5.5L Racing Brushless Motor is 5.5 turns, and is ideal for Truck and 4WD racing, and 1/12th scale “Club” Racing. (#3305)
Velociti Light 6.5L Racing Brushless Motor is 6.5 turns, and is ideal for Truck and 2WD Buggy racing and very tight 1/12th scale tracks. (#3306)
Velociti Light 7.5L Racing Brushless Motor is 7.5 turns, and is ideal for loose or slippery track conditions when running 2WD. (#3307)

   

Lightweight, ribbed, aluminum end bells and blue-anodized sleeve
   
Provides approximately 20% longer run-times compared to brushed motors
   
Direct-Solder Wiring Tabs for flexible soldering options
   
Virtually maintenance free
   
User-replaceable rotor (#5908), front end bell/bearing, and rear bearing (#5919)   

Thermal Overload Protection (when used with a Novak brushless ESC)
   
No cogging
    Designed, dyno-tested and factory hand-wound by Novak in Irvine, California
VELOCITI LIGHT BRUSHLESS MOTOR SPECIFICATIONS
   
Turns:    

3.5 (#3303)
4.5 (#3304)
5.5 (#3305)
6.5 (#3306)
7.5 (#3307)

Design: Sensor-based
Motor Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)
Input Voltage: 4-6 cells (1.2V/cell) or 2 cell Li-Po
Magnet: Sintered nickel-plated, Neodymium (one-piece, multi-pole cylindrical high-strength)
   
Watts:    

431 (#3303)
413 (#3304)
350 (#3305)
315 (#3306)
250 (#3307)
   
KV (unloaded):     10,300 RPM/volt (#3303)
8,200 RPM/volt (#3304)
6,800 RPM/volt (#3305)
5,900 RPM/volt (#3306)
5,400 RPM/volt (#3307)

Motor Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)
Motor Weight: 6.00 oz. (170 grams)
Shaft Diameter: 0.125” (3.2 mm) [accepts all existing pinion gears]
Bearing Size: Oversized 1/2” x 3/16” Front; Standard Rear (3/8" x 1/8") (12.7x4.8mm)
Protection: Thermal

Pris: 1395.00Kr

• Meddela en Vän