Motor Three-80 Pro BL 10.5t KV7300

Produktinformation
Motor Three-80 Pro BL 10.5t KV7300

Kompromisslös högvarvig motor för 1:18. Passar fint ihop med Novaks Mongoose Micro fartreglage.

Pinionrekommendationer:

Mod 0.6: For DuraTrax Vendetta line
Mod 0.5: For Associated, Kyosho and Team Losi's micro vehicles, as well as Tamiya's TamTech line.

#5200 Mod 0.6 Pinion Gear Set: 11T/12T/13T
#5210 Mod 0.5 Pinion Gear Set: 11T/12T/13T
Works well on small, tight tracks

#5201 Mod 0.6 Pinion Gear Set: 14T/15T/16T
#5211 Mod 0.5 Pinion Gear Set: 14T/15T/16T
Performs great on medium-sized tracks

#5202 Mod 0.6 Pinion Gear Set: 17T/18T/19T
#5212 Mod 0.5 Pinion Gear Set: 17T/18T/19T
Excels on large tracks

THREE-80 MICRO PRO BRUSHLESS MOTOR FEATURES

380-size brushless motor specifically designed by Novak for 1/16th to 1/18th scale micro vehicles
Sensor-based design for complete throttle control
High-performance Nickel-plated Sintered Neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions
Oversized, rugged  front bearing for increased load handling and bearing life
Multiple motor mount screw patterns
Lightweight ribbed aluminum end bells
Rebuildable design: user-replaceable rotor (#5915) and replacement front endbell & bearing kit (#5916)
Compatible with Novak Mod 0.6 Pinion Gears (#5200, #5201 & #5202) and Mod 0.5 Pinion Gears (#5210, #5211 & #5212)
Thermal Overload Protection (when used with a Novak Mongoose Brushless/Brush ESC)
Minimal Maintenance and No Cogging
Meets oHS compliance and includes 120-Day Warranty
Designed, hand-wound and dyno-tested by Novak in Irvine, California
       
THREE-80 MICRO PRO BRUSHLESS MOTOR SPECIFICATIONS:

Turns: 8.5 (#3450), 10.5 (#3451), 13.5 (#3452)
Design: Sensor-based
Input Voltage: 2-3 cell Li-Po or 4-9 Ni-MH/Ni-Cd cells (1.2 volts/cell)
Watts: 210 (#3450), 165 (#3451), 125 (#3452)
Kv (unloaded): 9,000 (#3450), 7,300 (#3451), 6,000 (#3452)
Motor Size: 380 size: 1.02" D x 1.48" L (26 D x 37.7 L mm)
Motor Weight with wires: 2.54 oz. (72 grams)
Shaft Diameter: 1/8" [accepts all existing pinion gears]
Bearing Size: Oversized (1/2" x 3/16") Front; Standard Rear (7mm x 3mm)
Protection: Thermal
Magnet: Sintered Nickel-plated Neodymium (one-piece, multi-pole cylindrical)

Pris: 1195.00Kr

• Meddela en Vän